Package codes P-01 to P-04

What each package is actually for

Starting UAH ranges confirmed after inspection

  1. P-01

    Polish

    One machine polish stage to lift light swirls and restore gloss, with paint depth readings logged before and after the pass.

    Intended useDaily-driven cars with sound paint and no film requirement.

  2. P-02

    PPF

    Clear protective film cut and plotted per panel for high-impact zones, with edges wrapped where the panel shape allows.

    Intended useNew cars, motorway mileage, gravel and stone-chip exposure.

  3. P-03

    Ceramic

    Coating applied after decontamination and correction, with a stated cure window and a written wash routine for handover.

    Intended useOwners who want easier washing and gloss retention without film.

  4. P-04

    Custom

    A per-panel build that pairs film on exposed zones with coating elsewhere, plus a care schedule written for the owner.

    Intended useMixed use, track days, or a specific appearance brief.

The inspection fee is credited toward a package booked within 14 days. Compare film and coating layers or request a starting quote.

Specification

Film and coating, stated in numbers

04 packages compared

Thickness is the build measured in micrometres. Warranty years start at handover. Cure time is the window before the first wash or rain exposure.

Package Thickness, µm Warranty, yrs Cure time Recommended use
P-01Polish None added n/a None Gloss recovery on healthy paint, pre-sale refresh
P-02PPF 150-200 10 24 h Bumpers, bonnet and mirrors on daily-driven cars
P-03Ceramic 2-4 5 12 h Wash speed and gloss where no film is planned
P-04CustomRecommended 200 + coat 10 48 h Full-body film with a ceramic top layer on high-value cars

Figures come from the inspection sheet and are averages. Panel shape and film lot can shift the final thickness by a few micrometres.

Scope boundaries · P-01 to P-04

What each package covers, and what it never covers

Written into every order sheet

Included

  • P-01 Hand wash, tar and iron decontamination, single-stage machine polish, panel wipe, sealant, controlled-light photo set.
  • P-02 Pre-cut film on the panels listed in the quote, edge wrap where geometry allows, inspection visit on day 7.
  • P-03 Coating applied over corrected paint, 24-hour cure bay, gloss and thickness readings at handover.
  • P-04 Written scope sheet agreed before work starts, staged billing per phase, revised quote if defects are found mid-process.

Excluded

  • Paint and body repair, dent pulling, glass replacement, wheel-off refinishing.
  • Interior deep cleaning and engine bay work, unless added as a separate line.
  • Film or coating over rust, peeling lacquer or an earlier repair, without written approval.
  • Reversal of previous film or coating applied elsewhere.
  • Damage from brush washes, standing bird droppings, fuel spills or unrecorded collisions.

Maintenance you keep

P-02 film
pH-neutral wash every two weeks, day-7 inspection, annual edge and lift check.
P-03 ceramic
Maintenance wash at 30 days, booster service every 12 months to hold beading.
P-01 polish
Sealant top-up every 6 months, light correction every 18 to 24 months.

The full schedule sits in our care timeline.

Starting ranges / confirmed after inspection

What each package code starts at

04 codes compared

P-01Polish
from 6 800 UAH
P-02Protective film
from 42 000 UAH
P-03Ceramic coating
from 14 500 UAH
P-04Custom appearance
from 68 000 UAH

Every quote begins with paint depth, gloss and defect mapping. The inspection fee is credited toward a package booked within 14 days, so the number you approve is the number we work to.

Book the inspection

+380 733 156 3722 contact@gruvenixa.com